Extensive research carried out over the last few years has been fully employed in producing the integrated CDX2 CD player. More recently the CDX2 has undergone some performance-enhancing modifications to offer additional flexibility and continue in its offering of as few compromises as possible to ensure complete musical satisfaction, rivalling that of the finest analogue turntables.
Notable among the modifications to the new version are the inclusion of a switchable S/PDIF output for use with external digital to analogue converters and a BNC connector for correct impedance matching, as well as performance-enhancing modifications to the internal boards.
The CDX2 is designed to be the best in its class, incorporating genuine technological advances to provide a thoroughly enjoyable musical experience.
The CDX2's design was recently updated and includes:
Integrity and stability of the RF signals read by the laser were prime design considerations for the CDX2's development. A suspended transport and low mass magnetic clamping system ensures that the disc spins accurately and silently, unhindered by mechanical resonance.
The mass of the custom-made glass reinforced front-loading drawer mechanism has been carefully calculated to optimise rigidity and isolation. The addition of anti-vibration, resonance-controlling feet complement the elegant new cast and extruded anti-magnetic chassis to protect the sensitive internal components from resonance and microphonic vibration. Additionally, the internal shielding has been improved bringing about further upgraded performance and lower noise.
Paths between critical components are as short as possible to preserve delicate signals and each stage of the circuitry is powered by a separate regulated supply. Correct earthing is used throughout and there is no headphone output.
Both the transport and chipset have been upgraded for the CDX2. The HDCD decoder/digital filter is only activated when playing encoded discs. Eight-times over sampled data is then sent to two (one per channel) Burr Brown PCM mono D/A converters.
A separate, fully optimised master clock controls all main digital functions, and the clock configuration and layout are engineered to minimise jitter. A seven-pole analogue filter follows the DAC to remove spurious noise.
The CDX2 has a fully double-regulated power supply with 20 low-noise, regulated power supplies on the main circuit board, plus a separate supply on the servo control board and another on the display board. It is a stand-alone, mains powered machine, which may also be used with the XPS ultra low noise power supply, providing a substantial improvement in sound quality.
Naim research has proved that divorcing the main power supply from a CD player is wholly beneficial and the Naim XPS power supply is extremely sophisticated with six separately regulated, ultra low noise outputs, featuring a toroidal transformer and six power regulators. This ensures complete stability of the ultra-sensitive circuitry in the CDX2. The same external supply is used with the Naim CDS3 CD player, thus providing a further possible upgrade path from one player to the other.
All main control functions are handled by a microprocessor running Naim-written software. Every aspect of the SAA 7324 servo controller/decoder functionality is under software control: Naim-written codes allow maximised performance in all areas. For example, the transport parameters are optimised for each disc as it is loaded.
Special care has been taken to ensure that the CDX2 player/user interface is as logical as possible with extra features such as "display off" (for improved sound quality) and program cancel, where tracks the listener does not want to hear can be quickly selected.
Worthwhile user features have been added: in addition to a clearer layout of the back panel, RC5 and optional RS232 ports have been fitted, allowing seamless integration into even the most complex of home installations.
In common with the flagship CD555 CD player the CDX2 has user-configurable outputs, allowing a choice between the preferred DIN output and RCA phono connections, allowing the CDX2 to be used with a wide range of other manufacturers' cables and components.
|Analogue Outputs||DIN, RCA|
|Line Outputs Fixed (level)||2.1V rms at 1kHz|
|Output Impedance||10Ω (max.)|
|Load Impedance||10kΩ (min.)|
|Frequency Response||10Hz – 20kHz, +0.1/-0.5dB|
|THD + N||<0.1%, 10Hz -18kHz at full level|
|Phase Response||Linear phase, absolute phase correct|
|De-emphasis||±0.1dB referred to main response|
|Digital Outputs (type)||S/PDIF, 75Ω BNC|
|Power Supply||XPS, 555PS|
|Remote Control||Infra Red (RC5)|
|Remote Input||3.5mm jack on rear (RC5)|
|RS232||Optional (DE9 female)|
|CD Formats||Red Book|
|Disc Compatibility||CD, CD-R|
|USER CONTROL INTERFACES|
|Front Panel||Four buttons|
|Mains Supply||100V, 115V, 230V; 50 or 60Hz|
|Dimensions||87 x 432 x 314mm (H x W x D)|
|Front||Brushed and black anodised|
|Case||Black powder coated|
Here is a selection of reviews that have been written about this product. Where PDF downloads or online links are available to us, they are featured.
Here are all the items available for download that relate to this product. If the information you require is not featured, please contact Naim Customer Support.