Ovator

高保真产品

『名』产品系列

『名』产品类别

产品参考信息

品牌背景

建议系统

『名』零售商将为您建议最适合您的系统,但您不妨先考虑将 Ovator S-600 配合下列产品使用::

  • 分体式系统
  • NAC 202
    NAC 202
  • NAP 200
    NAP 200

    这规格以上的任何前置放大器/功率放大器的配搭将能供给 Ovator S-600。

升级之路

Ovator S-600 可选用的升级是:

  • SNAXO 362
    SNAXO 362

    加上此设备以进行动态操作

Download PDF

Ovator S-600 扬声器(音箱)

ovator-s600_front_back_side.jpg
  • ovator-s600_front_back_side.jpg
  • ovator_s-600_front_10pc.jpg
  • ovator_s-600_front_50pc.jpg
  • ovator_s-600_front_3-4.jpg
  • ovator_s-600_side.jpg
  • ovator_s-600_rear.jpg
  • ovator-s600_all.jpg

Ovator S-600这60升机箱内装有200mm双低音驱动及85mm的BMR平衡模式发声器,它专为较大的房间及配合奈姆高级旷音器而设计。 由延展至28赫兹的低音域至最高可媲美现场音乐强劲度的音域,Ovator S-600带来终极的高带宽及动态音乐重现。

有关更多技术详情,请参阅Ovator S-600白皮书。

 


更坚硬的地面尖柱

采用最精细、抗磁性的不锈钢M8地面尖柱,为扬声器与聆听环境地面之间的主要机械连接定下了全新的定义。

FEA美国联邦能源署模制的驱动机箱

Ovator的低音域驱动的钕质磁铁系统内设有坚硬的扬声器纸盆、天然树胶周边及铝制解调环。 S-600的低音域驱动更加入了大量的磁极片通风设备。 Ovator机型的低音域驱动拥有卓越的线性度及抗压缩功能。

电脑模制分频器

分频器内的顶级组件包括层积及空心的电感器,还有金属涂层聚丙烯电容器。

去耦叶状弹簧

钢质叶状弹簧提供机箱与基座之间的连接,去耦率在12赫兹以上。

压铸基座

压铸的基座包含了附件地区、分频器机盒及由上方调整的地面尖柱装置。

坚硬的多重混合机箱

机箱由25mm及50mm面板合成,并全面拉牢以提供坚硬、无回响及低衍射驱动基准面。 此精选面板亦拥有策略性的大量阻尼,而内部支撑装置包括为每个低音域驱动所制造的个别装载量部份。

电脑优化低音域驱动

Ovator S-600的低音域驱动的钕质磁铁系统内设有坚硬的扬声器纸盆、天然树胶周边及铝制解调环,以及大量的磁极片通风设备。 它拥有卓越的线性度及抗压缩功能。

BMR平衡模式发声器隔离机箱

BMR平衡模式发声器被固定在主机箱内12.7mm厚度的压制铝圆筒壁上。 和机箱相同长度的圆筒内装有经过技术分析及仔细聆听后精选的阻尼原料。

BMR平衡模式发声器驱动

BMR驱动包含了由双钕质磁铁系统内的声圈驱动的蜂巢隔膜,双钕质磁铁系统经过最精准的元件分析以优化其线性度。 压铸外壳提供所需坚硬度确保所播放的每一个音符皆达到最精准的效果。

BMR平衡模式发声器悬挂

包括BMR及其机箱的组件由两个分别位于机箱前后段的圆形硬铝片叶形弹簧悬挂在主机箱内。 这悬挂系统达到的4赫兹的去耦效果 -比BMR通带低六个八度音阶以上。

The Ovator S-600's balanced mode radiator (BMR) constitutes its most visible technological advance, yet the performance of this loudspeaker is equally the result of painstaking refinement in numerous elements of design, construction, and material selection.

For example, there is so much more to the musical reproduction of bass than low frequency extension, so the Ovator S-600 LF driver is designed not simply to play bass, but to do so with faultless musical accuracy. It incorporates a multitude of electro-acoustic details aimed at minimising distortion and compression, and the result is extended bass with peerless timing, dynamics, and pitch accuracy. One vital element in the design of a high performance bass driver is its chassis. Great rigidity and an open structure are vital but potentially conflicting requirements, so the pressure die-cast bass driver chassis of the Ovator S-600 incorporates a triangulated framework, borne of finite-element analysis, that ensures both rigidity and unimpeded air passage.

The Ovator S-600 crossover network is housed within the plinth and divides the audio signal between bass drivers and BMR with fourth order acoustic slopes at 380Hz. Each component selection is the result of intense technical analysis and listening, and the component arrangement is fundamentally informed by the layout and earthing techniques developed for Naim power amplifiers. A crossover module suspension system and individual component decoupling ensures any chance of microphony is minimised. Conversion to either bi-amp or tri-amp active drive is easily achieved through removal of the crossover module.

Just as much as it is BMR technology, it is the fine detail and the sum of the parts - the result of decades of speaker experience and development - that makes the Ovator S-600 so remarkable.

Balanced Mode Radiator Explained

The Ovator S-600 Balanced Mode Radiator (BMR) is the result of intense effort in both development and manufacture. Not only does the design of such a driver demand great intellectual understanding, but consistent manufacture requires extraordinarily fine specification and control of the physical characteristics of its components.

The underlying concept of the BMR is to engineer a practical implementation of the theoretically wide bandwidth and linear acoustic output of an unconstrained vibrating diaphragm. In practice, this is achieved by attaching balancing masses to a constrained diaphragm in carefully calculated locations. Such 'mode balancing' modifies the diaphragm's vibrational behaviour so that it simultaneously operates in pistonic and vibrational modes to generate wide-bandwidth acoustic output with a flat frequency response, consistent dispersion and low distortion. Thanks both to the BMR's exceptional inherent performance and to the absence of any mid/high frequency crossover discontinuity, it takes just a moment's listening to appreciate the Ovator S-600's breakthrough levels of musical coherence, timing and clarity.

扬声器
功率容量 25 - 150W (8Ω 等级)
录放幅频响应 28Hz 至 35kHz
微量电阻抗 4Ω (阻抗最低值 3.2Ω)
敏感度 2.83Vrms 供 88dB
外观
尺寸规格 1168 x 401 x 434毫米 (高 x 宽 x 深)
表层材料
标准 樱桃色、灰色、斑马式黑白
特制 紫檀、白缎

点评

以下是有关本产品的一些评论。若该评论有可供下载的PDF版本或网上链接,均有特别标示。

  • Tone Magazine 音频杂志 - October 2009

    "这 Ovator S-600 是扬声器设计的强劲模范。”
  • Hi-Fi World 高保真世界 - July 2009

    “这 Ovator 是一大跃进,远离利用死板的圆筒形活塞来推动空气的理念,那是现实中不可能实现的”

手册下载

以下是有关这产品所有可供下载的文件。如果这里没有您所需要的资料,请联络『名』客户服务。